Electrical Panel Manufacturers

Control Panel Engineering

Top Programmable Logic Controllers (PLC) Electrical Panel Manufacturers – Quality Control Panels

We have in-house manufacturing facility of Control Panels such as LT Panel, PDB Panel, MCC Panel,  Programmable Logic Controllers PLC Panel, VFD Panel, SD/DOL Starter Panel, Servo Panel, Mimic Panel and Instrumentation Panel

Key Features

As Programmable Logic Controllers Programmable Logic Controller (PLC) electrical Panel manufacturers, we utilize EPLAN Software as a standard in the creation of our Power and Control Drawings. Furthermore, we link through ERP to facilitate seamless production, minimize errors and expedite lead times.

Our PMCC Panels and Automation and drives Panels are stringently designed, assembled, and tested by the IEC 61439-1 and IEC 60204 standards, respectively. The PMCC Panel has obtained CPRI approval, and the cubicle Panels have ERDA approval for an IP55 protection class against Dust Ingress and Water.

The fabrication of the panel is performed using CRCA sheets of various thicknesses, ranging from 1.6mm to 3mm. In the context of pre-treatment and painting, we employ a seven-tank process where all sheet metal parts undergo degreasing acid pickling, and phosphating before a primer layer is applied. The panel is then painted with two coats of synthetic enamel light grey paint, in shades RAL 7035 or RAL 7032.

The control wiring is achieved using ISI marked Flexible PVC copper cable, which is suitably lugged with Cu Lugs and ferruled with a white sleeve at either end. 

In-house routine tests are conducted with a Megger (1000V DC) and high voltage tests are performed at 2.5KV for 1 minute on PCC and MCC Panels. Before final delivery, the Panel undergoes stringent checks by our Quality Control Engineers.

We pride ourselves on delivering the correct solution punctually and at an affordable cost.

PLC electrical panel

  • Using Siemens to make PLC
  • Prepare IO List and PLC Architecture
  • Develop Program as per Control Philosophy provided by Client
  • Successfully established Communication between Siemens-to-Siemens Devices and Siemens to third-party devices.
  • Cubicle Enclosure in MS or SS of Local, as well as Rittal, make.
  • Highest commissioning of 2300 IO PLC systems in the FMCG Segment
  • Provided for low-end application to Complex applications like Rolling Mill in the Steel Industry.

 

PLC CUM MCC PANEL

  • Provide PLC and MCC together in Compartmentalized and Non-compartmentalized Design.
  • We offer PLC cum MCC Panel that are designed, assembled and tested in compliance with standard Industrial norms.
  • Motor Starter Switchgear selection as per Type 2 selection chart or conventional chart as per client’s requirement.
  • Offer right solution at affordable price.

 

MCC PANEL

  • In order to meet various industrial requirements of our esteemed clients, we provide best Quality MCC Panel in Compartmentalized and Non-compartmentalized Design.
  • Highest commissioning MCC Panel of 1600A Incomer with 100 number of feeders in single length in Waste Water Industry
  • Offer reputed brand switchgear such as Siemens, Schneider, ABB and L&T as per client specification.
  • Offer Intelligent MCC with Siemens – Simocode, Schneider – LTMR, ABB – UMC 100.3 smart Relays.
  • We provide Local and remote operation facility, Auto and Manual operation mode as per client requirement.
  • Motor Starter Switchgear selection as per Type 2 selection chart or conventional chart as per client’s requirement.

 

VFD PANEL

  • Offer VFD Panel ranging from 0.37KW to 560KW LV Drives.
  • Provide solution in various application such as Fan, Pump, Conveyor, Surface/Centre Winding, Compressor, Mixer, Extruder, Agitators and many more application.
  • Successfully commissioned up to 560 KW AC Drive Panel.
  • Communicate through Industrial standard field bus such as Modbus, USS, Profinet and Profibus.

 

PCC PANEL

  • Successfully commissioned up to 4000A Incoming breaker with 40 Outgoing feeders.
  • Offer reputed brand switchgear such as Siemens, Schneider, ABB and L&T as per client specification.
  • Offer Copper or Aluminium busbar as per client requirement.

INSTRUMENTATION PANEL

  • We are engaged in the manufacturing and supplying of Instrumentation Panels for operation of Instruments like Temperature, Pressure, Flow, Level and Electrical Parameter. We are able to develop and fulfill customized Instruments Panel for OEM client.
  • We also provide PVC junction boxes consists of Terminals and markers with the degree of Protection IP54, IP55, IP65.

PDB PANEL

  • Backed by a team of skilled professionals, we are manufacturing and supplying a comprehensive range of PDB Panel. The provided panel is vastly utilized in the power station for distributing electricity. The panel we provide is precisely manufactured by our experienced professionals making use of high grade components and sophisticated technology in conformity with defined quality norms. Additionally, this panel is suitable to be used in residential as well as industrial areas.
  • Features
    High functionality
    Trouble free performance
    Easy to install

DOL/SD Panel

  • We manufacture Direct Online (DOL) and Star Delta Starter Panel with and without Relay/Timer Logic in bulk quantity to satisfy the requirement of our client for various application like Blower , Pump, Fan , RAV , Conveyor etc. Besides being manufactured from high-grade components and the latest technology, the offered starters are inspected properly by our experts.
  • Range : DOL Starter Up to 7.5 HP, 3 Phase and Star Delta Starter Up to 500 HP, 3 Phase

MIMIC PANEL

  • In Order to make the exact or approvixmate representation of any process application Mimic Panels are used.
  • Mimics are made in Vinyl marerials and special purpose PCB with SMD based Colourful LEDs to show the Plant Layout.
  • Nowadays Touch screen HMI and/or SCADA provided for online Mimic with all the relevant process information like Trends, Historical Data, Logs, Reciepes and Reports
x`x`x`